91蜜桃传媒吹潮粉嫩少妇,久久AV红桃秘 一区二区小说,台湾成人做爰A片,8x8×8Ⅹ成人无码免费视频
Hello! Shenzhen Win-drive Automation Equipment Co., Ltd. welcomes you!
0755-82113520、13823217507(WeChat)Site map|Legal Notice|Chinese
News
News
Current location: Home News Industry news What parameters are required for the selection of servo motor gearbox
What parameters are required for the selection of servo motor gearbox

Industry news|2022-04-12| admin


The combination of servo motor and gearbox is a very common transmission cooperation. The gearbox can play a good role in increasing torque and reducing speed, so that the transmission mechanism has a very suitable output power and optimizes the quality of machinery or workpieces. So what parameters are required for the selection of servo motor gearbox in production, let's take a look.



1: Speed ratio




The reduction ratio of the gearbox is roughly selected by dividing the rated speed of the motor by the final output speed. For example, if the final output speed is 200 rpm and the motor rated speed is 3000 rpm, the speed ratio of the gearbox is about 1:15. Final output speed depends on operating conditions.




2: Torque




The output torque of the gearbox is also the required torque we get when we choose the gearbox. We choose the gearbox because we hope that the motor rated torque of the gearbox is the smallest, and the gearbox can obtain a larger torque output by increasing the torque. Therefore, after determining the torque required by the mechanism, and then comparing the selected servo motor torque, the ratio of these two torques is the speed ratio of the gearbox torque to be selected. We generally allow some headroom for the final torque, and the gear ratio will be slightly larger than required.


Assume that the rated torque of the motor is 10N. m and the reduction ratio is 15, the rated torque of the selected gearbox model should be greater than 10 * 15 = 150 N.m




3. Precision


The precision of the gearbox can be selected according to the precision required by the mechanism, and can be matched according to the corresponding parameters. The return clearance of the gearbox (backlash, backlash or swing clearance) depends on the specific job requirements. Generally speaking, the gap used with the servo motor should not be greater than 20arcmin, and the single-stage deceleration can be less than or equal to 3arcmin, which is generally a high-end product.




4: Specifications




The cross-sectional size of the gearbox is generally similar to that of the motor. For other parameters, it is best to refer to the description of the selected brand. Technical samples generally describe selection steps and calculation examples. Specific models are represented by different brands. Generally expressed by output flange size or section size, generally 40/42, 50/60, 70/80, 90, 115/120, 142, 160, 180, 220, 240, etc.




General principles:




Small servo motors can be equipped with large gearboxs, while large motors are generally not equipped with small gearboxs.




The higher the hardness of the same specification, the better the quality, so our technology is hard tooth surface cutting technology.




Servo motor selection:




Speed (select as required)




Torque (According to the load structure, weight and speed, calculate the torque that the servo motor needs to output)




Moment of inertia (this parameter is related to the servo running accuracy on the mechanical structure, calculated by the weight of the load structure)




Generally, there must be a certain margin, that is, the safety factor.




Combine these three parameters and select samples to select the model of the servo motor.




Selection of gearbox:




Reduction ratio (determined according to the ratio of the motor speed to the final output speed, the ratio of the final output torque to the motor torque, and the square root of the ratio of the mechanical moment of inertia to the motor moment of inertia)




Bearing torque (final output torque should not be greater than the rated torque of the gearbox, which is related to the life of the gearbox)




Accuracy (select the appropriate accuracy requirements according to user needs)




Dimensions of accessories (installation of accessories between the load and the gearbox and the installation of accessories between the motor and the gearbox are determined according to the product drawings)




The above is the relevant knowledge of the parameters required for the selection of the servo motor gearbox. The parameter configuration of the gearbox such as torque and accuracy is also very important in the selection, and must be paid attention to in the selection process.

Tel: 0755-82113520, 13823217507  
E-mail: sales@sz -windrive. com  
URL: m.hebeiseo.com com  
Address: room 406, MaoYuan building, No. 9, Songyuan Road, Guiyuan street, Luohu District, Shenzhen  

WeChat

Links
Shenzhen Win-Drive Automation Equipment Co., Ltd.  ALL RIGHT RESERVED 粵ICP備12016317號
亚洲中文字幕一区 | 免费看无码一级A片放24小时 | 午夜伦伦电影理论片A片结婚前夜 | ,国产乱人伦真实精品视频 无码秘 蜜桃一区二区三区 | 麻豆国产一区二区三区四区 | 国产又粗又大又黄 | 中文字幕在线免费观看 | A片无码免费久久久秀色 | 日韩无码国产精品 | 欧美与黑人午夜性猛交久久久 | 强被迫伦轩高潮无BD | 免费无码婬片AAAA片上门服务 | www.oumei| 无码在线视频一区二区三区四区五区 | 高清无码视频在线观看 | 国产A级毛片久久久久久 | 一区二区在线视频 | 熟交XXXXⅩ欧美老妇妇牲蜜桃 | 国产福利一区二区三区在线播放 | 欧美日韩国产在线 | 四川女人高潮一级毛片 | 影音先锋女人aV鲁色资源网站 | 国产精品久久久久久人妻黑料 | 成人精品鲁一鲁一区二区 | 69精品一区二区三区无码吞精 | 久久久无码国产精品无码三区三区 | 亚洲AV无码一区二A片清宫性史 | 国产精品久久久久9999 | 欧美一区二区三区成人 | 国产伦子伦对白视频免费 | 黄色视频网站在线观看视频 | 国产中文字幕在线观看 | 少妇在厨房被躁得呻吟中文视频 | 免费A级毛片无码无遮挡 | 无码日韩精品视频 | 精品人妻无码一区二区三区不卡 | 无码人妻精品一区二区蜜桃苍井空 | 国产婬乱片A片AAA毛姪片 | 亚洲免费精品视频 | 亚洲一区二区在线免费观看 | 肉丝美脚视频一区二区 |